Software License and Service Agreement
SwiftCam Technologies Group Co., Ltd.(hereinafter referred to as “SwiftCam “) hereby reminds all users to carefully read and fully understand the Software License and Service Agreement (hereinafter referred to as “the Agreement”). Users should carefully read and fully understand the terms of the Agreement, particularly those pertaining to the exemption or limitation of SwiftCam’s liability, dispute resolution, and applicable laws. Terms associated with the exemption or limitation of liability are indicated by bold text; please read them carefully. After reading the Agreement carefully, please decide whether you are willing to accept the terms listed herein (minors should read the Agreement together with a legal guardian). By downloading, installing, and using the Software or by opening and logging in to your account, you accept the terms of this Agreement and are legally bound by them.
SwiftCam reserves the right to modify this Agreement. Any amended terms shall be announced on the official website or included with the Software, and the new terms shall take effect on the date of publication. Users may download and reinstall the Software or browse the amended terms on the website. If you do not accept the amended terms of this Agreement, please immediately discontinue your use of the ” SwiftCam ” software and services provided by SwiftCam. By continuing to use the “SwiftCam” software and services provided by SwiftCam, users accept the amended terms of this Agreement.
I. General Provisions
1.1. This Agreement is the agreement entered into by and between you (hereinafter referred to as the “User”) and SwiftCam concerning the download, installation, and use of the “SwiftCam” software (hereinafter referred to as the “Software”) by the User, as well as the terms related to the use of SwiftCam’s services.
1.2. The Software and services are provided by SwiftCam for installation on (including but not limited to) smart mobile devices, to provide services such as device pairing and operating smart products for the User who uses the said smart device.
1.3. The rights of ownership and operation of the Software and services are vested in SwiftCam.
Ⅱ.Scope of Software Licensing
2.1. SwiftCam grants the User a personal, non-transferable, and non-exclusive license to use the Software without the right to sublicense.
2.2. The User may install, use, display, and run the Software on a single mobile terminal device for non-commercial purposes. However, the User shall not install, use, or run the Software for the purpose of any commercial operation. The User shall not copy, alter or modify any data stored within the Software, any data released to the memory of any terminal device during execution of the Software or any data generated during the interaction between the client and the server during execution of the Software. The User shall not operate the Software through other software or create any derivative of the Software in any form, including but not limited to plug-ins, bots or accessing the Software and related systems through unauthorized third party tools/services. If you must sell, copy or distribute the Software commercially, such as for software pre-installation and bundling, a written authorization and permission from SwiftCam must be obtained in advance.
2.3. Without the permission of SwiftCam, the User shall not install the Software on other terminal devices that are not expressly permitted by SwiftCam。
2.4. The User may make a copy of the Software for the purpose of using the said Software and services, which shall be used only as a backup. All backup copies shall include the copyright information provided with the original software.
2.5. Except as expressly authorized by this Agreement, SwiftCam does not grant other rights to the User. If the User intends to exercise any other right, the written consent from SwiftCam shall be obtained in advance.
III. Software Acquisition, Installation, and Upgrades
3.1. The User shall download and install the Software from the website or in the manner designated by SwiftCam.Be careful not to download the Software from undesignated websites, so as to prevent mobile devices from being infected by malicious programs that can destroy user data and acquire confidential user information. If you acquired the Software or an installation program with the same name as the Software from a third party that has not been authorized by SwiftCam, SwiftCam is unable to guarantee the normal functionality of such software and will not be liable for any losses you sustain from using such software.
3.2. The User must select the Software version that matches the terminal device it is to be installed on. Otherwise, any software problems, device problems or damages resulting from using an incompatible software version on the device model shall be solely assumed by the User.
3.3. In order to improve User experience and optimize service content, SwiftCam reserves the right to provide replacement, modified, and upgraded versions of the Software.The Software will enable the “upgrade prompt” feature by default for the User. Depending on the software version installed by the User,SwiftCam will provide the User with the decision whether to enable the said feature. After the new version of the Software is released, SwiftCam does not guarantee that older versions of the Software will continue to be usable.
IV. Usage Specifications
4.1. The User may use the Software and services in accordance with this Agreement and relevant laws. The User shall not commit the following acts:
4.1.1. Delete any copyright information from the Software and other duplicate copies, or modify, delete, or circumvent the technical measures set by the Software for the protection of intellectual property rights;
4.1.2. Perform reverse engineering of the Software, such as disassembly, decompilation or other attempts to obtain the source code of the Software;
4.1.3. Add, remove or change the features or running effects of the Software by modifying or forging the instructions and data during the running of the Software, or otherwise operate or disseminate to the public the software or methods used for the purposes described above, regardless of whether or not such actions are performed for commercial purposes;
4.1.4. Use the Software to commit any acts detrimental to network security, including but not limited to: using unauthorized data or access to unauthorized servers/accounts; unauthorized access to public networks or the operating system of others, and delete, modify or add any saved data; unauthorized attempts to detect, scan, or test the Software system or network weaknesses, or perform other actions to disrupt network security; attempt to interfere with or destruct the normal operation of the Software system or website, deliberately spread malicious programs or viruses, or carry out other acts that disrupt or interfere with normal network information services; forge the names or partial names of TCP/IP data packets;
4.1.5. The User logs into or uses the Software and services through a third party compatible software or system which was not developed, authorized, or approved by SwiftCam, or makes, publishes, or disseminates the tools described above;
4.1.6 Without the written consent of SwiftCam, the User performs action on the Software or the data contained therein including but not limited to the following: using, leasing, copying, modifying, linking to, reproducing, compiling, releasing, publishing or establishing a mirror site for or using the Software without authorization to develop related derivative products, works, services, plug-ins, bots, compatibility or interconnection;
4.1.7. Using the Software to publish, transmit, broadcast, or store content which violates local laws and regulations;
4.1.8. Use the Software to publish, transmit, disseminate or store any content that infringes on the legitimate rights and interests of others, such as intellectual property rights and trade secrets;
4.1.9. Use the Software to publish, transmit or disseminate advertising information or spam in bulk;
4.1.10. Use the Software and other services provided by SwiftCam in any unlawful manner, for any unlawful purpose or in any manner inconsistent with the use licensed under this Agreement;
4.2. Information Publication Specifications
4.2.1.You may use the Software to publish content originally created by you or that you have the right to publish such as opinions, data, text, information, user names, images, photos, personal data, audio/video files and links. You must guarantee that you own the intellectual property rights for or have obtained legal authorization to use the information you upload and that your use of the Software and services does not infringe any legitimate rights or interests of any third party.
4.2.2. When using the Software, the User
4.2.3. You shall not use the Software to commit the following acts, including but not limited to:
188.8.131.52. Produce, reproduce, publish, disseminate or store any content that violates local laws and regulations;
184.108.40.206. Publish, transmit, disseminate or store any content that infringes on the legitimate rights and interests of others, such as their right to reputation, personality rights, intellectual property rights, and trade secrets;
220.127.116.11. Make up fictitious facts or conceal the truth to mislead or deceive others;
18.104.22.168. Publish, transmit or disseminate advertising information or spam;
22.214.171.124. Engage in any other behavior that violates local laws and regulations.
4.2.4. Without the permission of SwiftCam , you shall not carry out any commercial activities inside the Software, such as advertising and selling merchandise.
4.3. You understand and agree that:
4.3.1. SwiftCam will determine whether the User is suspected of violating the above-mentioned usage specifications and, based on the result of such determination, suspend or terminate the use license granted to you or take other restrictive measures that may be taken in accordance with this Agreement;
4.3.2. SwiftCam will directly delete any information suspected of being unlawful or infringing the legitimate rights of others or violating this Agreement, which is published by the User during his/her use of the licensed Software;
4.3.3. If you violate the above-mentioned usage specifications and thereby cause damages to a third party, you need to assume the liability in your own name and shall hold SwiftCam harmless from and against any losses or expenses arising therefrom;
4.3.4. The User shall indemnify and hold harmless SwiftCam from and against any and all losses, third-party claims, administrative penalties and damages and/or expenses, including reasonable attorney fees and investigation and evidence collection costs, incurred or suffered by SwiftCam resulting from the User’s violation of relevant laws or breach of this Agreement.
V. Service Risks and Disclaimers
5.1. The User must procure the device required for Internet access and the usage of telecom value-added services by the mobile terminal device, and bear the telecommunication fees, data fees, and related costs incurred by accessing the Internet or charged by third parties (including but not limited to telecommunications and mobile communication providers). If any telecom value-added services are needed, you are advised to confirm the costs with your telecom value-added service provider.
5.2. Neither SwiftCam nor its Partner is liable for any loss suffered by the User due to reasons attributable to third parties such as communication line failures, technical problems, network or mobile terminal device failures, system instability issues, and other force majeure factors.
5.3. The Software, like most other Internet software, may be affected by differences in factors including but not limited to the user, network service quality and social environment, and may also be subject to intrusion from various security problems, such as the usage of User data by others that creates a disturbance in real life; other software downloaded and installed by the User or other websites visited by the User contain “Trojan horses” and other viruses that threaten the security of the User’s terminal device information and data and then affect the normal use of the Software. The User shall strengthen data security and consciousness of protecting user information and must strengthen password protection to prevent losses and disturbance.
5.4. When the User uses the Software or requests SwiftCam to provide specific services, the Software may call upon a third party system or software to support the User’s use or access. The results of the use or access will be provided by the third party. SwiftCam does not guarantee the safety, accuracy and effectiveness of the results achieved through the support of the said system or software, nor does SwiftCam assume any other uncertain risks; SwiftCam assumes no liability in the event that any dispute arises therefrom or damage is caused thereby.
5.5. SwiftCam specifically brings to the User’s attention that, in order to protect the company’s business development and right to make adjustments, SwiftCam has the right to modify or suspend the services at any time without notice to the User and without any liability to the User or any third party.
5.6. Except as expressly specified in laws and regulations, we will do our utmost to ensure that the Software and the technology and information involved are safe, effective, accurate and reliable; however, due to limitations in current technology, the User understands that SwiftCam cannot provide any guarantee.
5.7. The User shall be solely liable for compensation for any personal injury or incidental or indirect economic losses, including but not limited to compensation for profit loss, data loss and losses from interruption of business or any other commercial loss or compensation claim arising out of or in connection with any of the following circumstances:
- 7.1. The use of or failure to use the licensed software;
- 7.2. The unauthorized use of the Software or modification of the User’s data by a third party;
- 7.3. Costs and losses incurred by the User during the use of the Software;
- 7.4. Misunderstanding by the User of the Software;
- 7.5. Other losses in connection with the Software for reasons not attributable to SwiftCamSwiftCam.
5.8. For acts carried out through the Software between the User and other users of the Software, the liability for any personal injury or economic damages or losses that arise or may arise from the User having been misled or deceived shall be borne according to the law by the party at fault.
VI. Statement on Intellectual Property Rights
6.1. SwiftCam is the intellectual property right holder of the Software. All intellectual property rights such as copyright, trademark, patent, trade secret, etc. relating to the Software, and all information related to the Software (including but not limited to text, pictures, audio, video, graphics, interface design, layout, data or electronic documents, etc.) are protected by the laws and regulations of the region you are currently living in and corresponding international treaties. SwiftCam enjoys the intellectual property rights described above.
6.2. Without the prior written consent of SwiftCam, the User shall not independently use or transfer any of the above intellectual property rights for any commercial or non-commercial purposes, or permit any third party to do so. SwiftCam reserves the right to pursue legal liability for such acts.
7.1. SwiftCam has the right to amend the terms of this Agreement when necessary, and any such amended terms will be published on relevant web pages. If the User does not agree with the amended terms, the User shall cancel the service. The User’s continuing to use the service constitutes acceptance of the amended terms of the Agreement.
VIII. Applicable Law and Dispute Resolution
8.1. The validity and interpretation of this Agreement shall be governed by the laws of the Hong Kong Special Administrative Region of the People’s Republic of China. In the absence of relevant legal provisions, international business practices and/or business practices may be used as references.
8.2. This Agreement is signed in Hong Kong.
8.3. Both the User and SwiftCam agree that any dispute arising from the services shall first be settled through consultations by the Parties. If no settlement can be reached through such consultations, either Party may submit the dispute to the court of competent jurisdiction over the district where this Agreement is signed.
9.1. For a specific service of the Software, there may be a separate agreement and related business rules, etc. (hereinafter collectively referred to as the “separate agreement”), so please read and agree to relevant separate agreement before using such specific service.
9.2. This Agreement shall enter into force on October 1, 2019.
9.3. The headings to all the terms of this Agreement are for ease of reference only and themselves contain no practical significance; they cannot be used in interpreting the meaning of this Agreement.
9.4. If any provision of this Agreement is or becomes invalid or unenforceable for any reason, the remaining provisions hereof shall remain in full force and effect and binding upon both Parties hereto.